Virette Technology Co., Ltd.
Virette Technology Co., Ltd.
Add to Cart
The pump is composed of an aluminum body to which the filter housing, the pump and the electronic motor are connected.
* Non-return valve integrated in the filter.
* Fuel filter consisting of a filtering cartridge in synthetic resin with stainless steel wire gauze.
* Self-priming blade rotary volumetric pump.
* Centrifugal air separator composed of two concentric pipes, the internal one allows gases separated from the liquid part to be collected.
* By pass valve equipped with a device for limiting and regulating pump delivery pressure.
* Air separator drainage reflux chamber equipped with a float valve allowing drainage of the liquid part on reaching a pre-established level, and with a vent for evacuating the air separated from the liquid.
Features
* Reduced number of components
* Easy maintenance
* Reduced dimensions and weight
* No belts or pulleys in motor-pump connection
* Filter flanged to the main body
* Wide filtering surface
* Compliance with OIML Standards
| Working Pressure | ≤0.3 Mpa |
| Flow rate | 90-120L/m |
| Vacuum | ≥0.06Mpa |
| Motor Power | 0.75KW |
| Motor Speed | 960rpm |
| Rated Current | 2.3A |
| Noise | ≤72dB |
| Suction Pipe Section | 1-1/2" |
| Dimension | 360mmx320mmx300mm |
| Net Weight | About 15KG |
